My PA2000w displays an error
indication
If a problem has occurred in the printer, the indicators on the operation panel, the KYOCERA Client
Tool, and the Status Monitor will show the status of the printer. Problems that can be resolved by
the user are described below.
Indicators
+ If the attention indicator is lit or flashing, check the Kyocera Client Tool.
If the Attention indicator is lit or flashing and an error code appears in the display on the operation
panel, check the KYOCERA Client Tool or Status Monitor.
Note: If the indicators light or flash repeatedly in manners not described above, a service error has
probably occurred. Turn off [Main Power], unplug the power cord, and then plug the power cord
black in and turn on [Main Power]. This may clear the error.
To Next Page
Loading...
