6-9
Maintenance
6 On the drum unit, slide the main charger cleaner (gray) back and forth 2 or 3 times to clean the charger wire, then
return it to its original position (CLEANER HOME POSITION)
7 Close the charger cover.
8 After cleaning, return the removed drum unit to its position, aligning the guides at both ends with the slots in the
machine. After that, press down the drum unit lever until they click.
IMPORTANT Remove the fixing tape on the main charger cleaner before cleaning for the first time.
After cleaning, make sure you restore the main charger cleaner to its home position.
To Next Page
Loading...
