7-6
Troubleshooting
Indicator pattern when an error occurs
When a problem occurs on the machine, the indicator on the operation panel lights in a specific pattern. Problems that can
be resolved by the user are described below. If the problem persists, contact your Service Representative.
Indicator Description
Reference
Page
• Offline state 4-7
• Close top cover
• Replace toner
• Missing Toner cartridge
• Missing drum unit
6-1
6-4
• Paper jam 7-9
• Add paper
• Load Cassette
• Set paper
• Toner low
• Paper source not supported *
* In case an error occurs, pressing
[Main Power] ( ) once ignores the
error and continues printing.
Remedy: Change the Paper Source of
the printer driver.
3-3
6-2
-
This error indicates the following error.
• KPDL error
• Memory overflow
• Print overrun
• RAM disk error
• File not found
• Top Tray Full
In case an error occurs, pressing
[Main Power] ( ) once ignores the
error and continues printing.
-
0.4 Sec. 0.4 Sec. 0.4 Sec.
0.4 Sec.
0.4 Sec. 0.4 Sec. 0.4 Sec.
0.4 Sec.
0.8 Sec. 0.8 Sec. 0.8 Sec.
0.8 Sec.
0.4 Sec. 0.4 Sec. 0.4 Sec.
0.4 Sec.