Kyocera PA2001w - Printing Reports

3-50
Preparation
Printing Reports
You can print reports to check the machine status, and event log.
When [Main Power] ( ) is pressed, Attention Indicator and Main Power Indicator flash at the same time, and the machine
switches to the Report Print Mode. A report can be printed by pressing and holding [Main Power] ( ) in this state.
A report to be printed can be selected with the pressing length.
Pressing for 5 seconds: Prints the status page.
Pressing for 10 seconds: Prints the network status page. (PA2001w/PA2000w only)
Pressing for 15 seconds: Prints the event log page.
Note while pressing [Main Power] ( ), Attention Indicator and Main Power Indicator blink twice alternately in 5-
second intervals.