3-2
Preparation
Power On/Off
Power On
1 Press [Main Power] ( ). The machine begins to warm up.
Power Off
1 Press and hold [Main Power] ( ) for 2 seconds or more.
IMPORTANT If you install the toner cartridge and switch on the power, the Main Power indicator and Attention
indicator will blink once simultaneously, and then blink alternately. Once the Main Power indicator lights, printer
installation is complete.
CAUTION If the machine will not be used for an even longer period of time (e.g. vacation), remove the
power plug from the outlet as a safety precaution.
IMPORTANT Remove paper from the cassettes and seal it in the paper storage bag to protect it from humidity.
To Next Page
Loading...
