3-44
Preparation
Device Defaults Tab
s
No. Item Description
1 Power off timer Select the length of time before the machine shuts off automatically when not in use.
The default preset time is 3 days.
Value: 1 to 6 hours, 9 hour, 12hour,1 day to 1 week
• USB is connected: Selects whether or not to turn the power off automatically
when a USB is connected.
• Network is connected: Selects whether or not to turn the power off automatically
when a Network is connected.
2 Auto sleep Set the sleep timer for the machine to go into sleep mode when not in use. The default
preset time is 1 minute.
Value: 1 to 60 minutes (1 minute increments)
3Units Select Inches or Millimeters for the unit for paper dimensions.
4 Print density Adjust density using 5 levels.
Value: Light, Medium light, Normal, Medium dark, Dark
5 Auto error clear Enable auto error clear. If an error occurs during processing, processing stops to wait
for the next step to be taken by the user. In the auto error clear mode, automatically
clear the error after a set amount of time elapses.
If you select On for auto error clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (every 5 seconds)
6 Form feed timeout When receiving print data from the computer, the machine may sometimes wait if there
is no information signaling that the last page does not have any more data to be
printed. When the preset timeout passes, the machine automatically prints the
documents. The options are between 5 and 495 seconds.
Value: 5 to 495 seconds (every 5 seconds)
7 Media type Set the default media type to load in cassette.
Value: Plain, Preprinted, Bond, Recycled, Rough, Letterhead, Color, Prepunched,
High quality, Custom 1-8 (65 to105 g/m
2
)
When Custom 1-8 is selected, the Custom name appears.
To Next Page
Loading...
