3-48
Preparation
Status Monitor Tab
No. Item Description
1 Set toner level alert Select to create an alert when the toner starts running low, and then select a
percentage between 0 and 100. If the toner level goes below this percentage, an alert
icon is displayed on the Supplies tab at the bottom of KYOCERA Client Tool screen.
2 Enable event
notification
Select to activate the notification feature for selected machine events. When selected,
notification options are available.
3 Enable pop-up
notification
When selected, a pop-up message appears in the lower right corner of the screen for
each selected event as it occurs.
4 Events list Select one or more events for the notification. To select all events, select Events.
5 Sound file With one or more events selected, select to enable sound notification. Type the
location of a sound file (.WAV), or click Browse to find a sound file located on your
computer. You can press the arrow button to hear the selected sound.
6 Use Text to Speech With one or more events selected, select and type your preferred text. The Microsoft
Text to Speech utility reads the text and plays it in a spoken voice. You can press the
arrow button to hear the selected text.
7 Run Client Tool on
startup
Enables run on startup for Client Tool.
If this setting is enabled, Client Tool will be launched automatically when the PC boots.
To Next Page
Loading...
