Why are my Kyocera All in One Printer copies too dark?
If your Kyocera All in One Printer copies are too dark, it might be due to the auto density adjustment mode being enabled. To correct this, perform the auto density adjustment procedure. Alternatively, if the manual density mode is set, use the Lighter key or the Darker key to properly adjust the density level.
How to fix light printouts on Kyocera TASKalfa 220 All in One Printer?
If your Kyocera All in One Printer's printouts are too light, and the machine is in Auto Density mode, set the correct density level. If the machine is in Manual Density mode, use the Image Quality key to set the correct density level. Make sure the toner is distributed evenly within the toner container by shaking it from side to side several times. Replace the toner container if there's a message indicating the need for toner. Replace damp paper with new paper. Clean the electrical charge section using the Cleaning Rod after opening the front cover. Also, disable EcoPrint mode.
Why are the printouts from my Kyocera All in One Printer dirty?
If your Kyocera All in One Printer's printouts are dirty, the platen or the original cover might be dirty. Clean the platen or the original cover. Also, the transfer roller might be dirty, so brush the transfer roller clean.
What to do when Kyocera All in One Printer says 'Add toner'?
If your Kyocera All in One Printer indicates 'Add toner', replace the toner container with a new one.
What to do if pressing Start key on Kyocera All in One Printer doesn't make copies?
If pressing the Start key on your Kyocera All in One Printer doesn't produce copies, it could be due to a message on the touch panel. Determine the appropriate response to the message and respond accordingly. Alternatively, the printer might be in Sleep mode. Press the Power key to recover the machine from Sleep mode, and it will be ready to copy within 1 second.
How to adjust darkness on Kyocera TASKalfa 220 printouts?
If your Kyocera All in One Printer's printouts are too dark, and the machine is in Auto Density mode, set the correct density level. If the machine is in Manual Density mode, use the Image Quality selection key to set the correct density level.
Why are my Kyocera TASKalfa 220 All in One Printer copies curled?
If your Kyocera All in One Printer copies are curled, it could be due to wet copy paper; replace it with dry, new paper. Also, if 'Middle 2' is set at the Paper type (Paper Weight) setting, change it to 'Middle 1'.
How to fix skewed copies on Kyocera TASKalfa 220 All in One Printer?
If your Kyocera All in One Printer is producing skewed copies, make sure the originals are set correctly. When using the platen, securely align the original along the original size indicator plates. Also, check the width guide plate position in the cassette to ensure the paper is set correctly.
Why are my Kyocera All in One Printer copies too light?
If your Kyocera All in One Printer copies are too light, several factors could be the cause: * The auto density adjustment mode might be enabled. To resolve this, perform the auto density adjustment procedure. * If the manual density mode is set, use the Lighter or Darker key to adjust the density. * The toner may not be evenly distributed. Shake the toner container horizontally about 10 times. * EcoPrint mode might be activated; disable it. * The copy paper might be wet; replace it with new paper. * The electrical charge section could be dirty; open the front cover and clean it with the charger cleaner rod.
Why are my Kyocera TASKalfa 220 printouts wrinkled?
If your Kyocera All in One Printer produces wrinkled printouts, the paper separator of the paper feed unit might be dirty; clean the paper separator. Also, if the paper is damp, replace it with new paper.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Speed (Black/A4) | 22 ppm |
| Warm-up Time | 30 seconds or less |
| Print Resolution | 600 x 600 dpi |
| Memory (Standard) | 256 MB |
| Standard Paper Capacity | 250 sheets |
| Copy Speed | 22 cpm |
| Copy Resolution | 600 x 600 dpi |
| Fax Modem Speed | 33.6 kbps |
| Hard Drive | Optional |
| Operating Systems Supported | Windows, macOS, Linux |
| Monthly Duty Cycle | 30, 000 pages |
| First Print Time | 8.5 seconds or less |
| Paper Sizes | A4, A5, B5, Letter, Legal |
| Paper Output Capacity | 100 sheets |
| Scan Features | Scan to Email, Scan to Folder |
| Fax Compatibility | Optional |
| Fax Transmission Speed | 3 seconds per page |
| Fax Resolution | 200 x 200 dpi |
| Interface | USB 2.0, Ethernet |
| Display | LCD Display |
To Next Page