2R4/2R5/2R6
6-18
(71) Media type attributes
1 to 28 (Not used: 18, 19, 20)
*: For details on settings, refer to
MDAT command in "Prescribe
Commands Reference Manual".
Weight settings Fuser settings
0: Light 0: High
1: Normal 1 1: Middle
2: Normal 2 2: Low
3: Normal 3 3: Vellum
4: Heavy 1
5: Heavy 2 Duplex settings
6: Heavy 3 0: Disable
7: Extra Heavy 1: Enable
(72) IO Calibration information K/C/M/Y
(73) Bias Calibration information -
(74) Sensor initial information -
(75) Calibration information -
(76) Calibration information -
(77) Calibration information -
(78) Calibration information -
(79) Calibration information -
(80) Paper loop correction shift amount -
(81) Paper loop correction interval -
(82) Paper loop correction patch amount -
(83) Calibration information -
(84) Calibration information -
(85) RFID information (K,C,M,Y) -
(86) RFID reader/writer version -
(87) Optional paper feeder firmware ver-
sion
-
(88) Color table version for printer -
(89) Color table 2 version for printer -
(90) Color table version for copy -
(91) Color table 2 version for copy -
(92) Maintenance information -
(93) MC correction 1 to 7
(94) Configuring the toner coverage coun-
ters
0: Full-color count display
1: Color coverage count display
(95) Low coverage setting 0.1 to 100.0
(96) Middle coverage setting 0.1 to 100.0
(97) Data sanitization information FAX Board/Main Memory/Panel Memory/SSD/Executed
time
1: Success
0: Fail
- : Not performed or Not installed
No. Items Contents
To Next Page
Loading...
