2R4/2R5/2R6
6-8
(2-1) Content of the maintenance mode (30ppm model)
Contents
Prints the list of the current settings of the maintenance items, paper jam and service call error
occurrences. Output the event log and service status page.
Also, sends output data to a USB memory.
Purpose
Checks the current settings of the maintenance items, paper jam and service call error occur-
rences.
Before initializing or replacing the backup memory, print the list of the current settings of the
maintenance items to reenter the settings after initialization or replacement.
Method
1.Press the [Start] key.
2.Select the item to output.
3.Turn it On/Off by the [Ż] [Ź] keys.
4.Press the [Start] key.
* :Insert a USB memory into the USB memory slot to output to it.
5.Select the item to output.
6.Press the [Start] key to output the list.
* :If A4 paper is available, it is output with this size. If A4 paper is unavailable, sekect the paper
source. Output status is displayed.
* :The output data is sent to the USB memory.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U000 Printing Maintenance Report
(Message: Mainte Report)
Items Output list
Maintenance Maintenance mode setting list
User Status Output User Status Page
Service Status Output Service Status Page
Event Output the event log report
Network Status Output Network Status Page
All All reports output
Items Output list
Print A report is printed.
USB(Text) Destination: send to USB memory (text format)
USB(HTML) Destination: send to USB memory (HTML format)
To Next Page
Loading...
