(Page.9/11)
Service Bulletin Ref. No. 2TV-0015 (J130)
(Service information) <Date> July 19, 2019
KYOCERA Document Solutions Inc.
For authorized KYOCERA engineers only.
Do not distribute to non-authorized parties.
Pass through the FFC terminal (z) disconnected at
Procedure 8 in between DUCT COVER INNER of
the new LSU drive unit (s) and the edge of the
drum relay PWB (y).
Connect the FFC terminal (z) to the FFC
connector of the drum relay PWB (y).
Reattch COVER DUCT LEFT (w).
Pass the LSU cleaning motor wire (q) through the
hole (v) on the left frame of the main unit (Refer to
Procedure 6)