Kyocera TASKalfa 351ci Service Bulletin

(Page.1/11)
Service Bulletin Ref. No. 2TV-0015 (J130)
(Service information) <Date> July 19, 2019
KYOCERA Document Solutions Inc.
For authorized KYOCERA engineers only.
Do not distribute to non-authorized parties.
A
B
C
CONFIDENTIAL
Subject:
서비스 호출 오류 C4600 에 대한 조치 (서비스 부품으로 먼지
필터, LSU 구동 장치 등 설정)
Model: l:
P7240cdn, P6235cdn, P6230cdn, P7040cdn, P6035cdn,
P6130cdn,
M6635cidn, M6630cidn, M6235cidn, M6230cidn, TASKalfa 351ci,
M6535cidn, M6530cdn, M6035cidn, M6030cdn, TASKalfa 350ci
Classification:
Field measures
timing:
At Set Up Next Periodic Maintenance
Next Visit/Service Call Information only
Phenomenon:
SC/Error Paper Feeding/Conveying Other
Image Machine operation
Type of change:
Hardware Firmware and Software Information
Depending on installation environment, dust gets into the main unit through the louver at the left side of the main
unit and adheres to the LSU drive part. The LSU cleaning motor rotation torque increases and servcie call error
C4600 (LSU cleaning motor error) might occur at the LSU slit glass cleaning (executed in a specified interval)
Follow the procedures 1-4 below when the above phenomenon occurs.
[Field measure] (Refer to page 3-5 for procedure 1,2,4 and 6 and after or procedure 3)）
1. Clean around the louver of the middle left covr and lower left cover (2 points).
2. Attach the filter mounting holder (No2)to the above louver and set the dust filter (No1).
3. Check the condition of LSU drive unit (No4 or No5) and replace it if necessary.
(It is difficult to remove dust inside the LSU drive unit and it is recommended to replace the unit but not
mandatory.)
4. (Maintenance afterward) Clean the dust filter or replace it when visiting the customer. (Standard interval
to replace: 1 year) At the same time, check the condition of the the filter mounting holder secured and if
coming off, use the double sided tape set of 6 pcs. (No3) to replace the double sided tape.
[Service parts set for the field measure]
To implement the above, parts for field measure are set for service.
Parts for field measure
No. in part table
Remarks
Set of 2 pcs. dust filters
No1
Used at the 1st attachment and filter
replacement afterward
Set of 2 pcs. filter mounting holders + 6
pcs. double sided tape
No2
Used at the 1st attachment only
Set of 6 pcs. double sided tape
No3
Used at the maintenance after implementing
this field measure
LSU drive unit (No4, 5)
No4, 5
Used to replace if difficult to remove dust

Kyocera TASKalfa 351ci Specifications

General

N-up printing	2, 4
Secure printing	Yes
Print technology	Laser
Resolution color	600 x 600 DPI
Maximum resolution	1200 x 1200 DPI
Duplex printing mode	Auto
Time to first page (black, normal)	6 s
Time to first page (color, normal)	7.5 s
Print speed (black, normal quality, A4/US Letter)	35 ppm
Copier resize	25 - 400 %
Maximum number of copies	999 copies
Time to first copy (color, normal)	8.5 s
Copy speed (black, normal quality, A4)	35 cpm
Scan to	E-mail, FTP, Image, SMB, TWAIN, WIA
Scanner type	Flatbed & ADF scanner
Grayscale levels	256
Scan speed (black)	60 ppm
Scan speed (color)	40 ppm
Image formats supported	JPEG, TIFF
Duplex scan speed (black)	62 ppm
Duplex scan speed (color)	46 ppm
Document formats supported	PDF, XPS
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Fax transmission speed	3 sec/page
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	100000 pages per month
Recommended duty cycle	2500 - 4000 pages per month
Replacement cartridges	TK-5305K, TK-5305C, TK-5305M, TK-5305Y
Number of print cartridges	4
Page description languages	PCL 5c, PCL 6, PCL XL, PDF 1.7+
Display	TFT
Control type	Touch
Product color	Black, Blue
Display diagonal	7 \
Market positioning	Business
Paper input type	Cassette
Total input capacity	350 sheets
Total output capacity	250 sheets
Maximum input capacity	1850 sheets
Total number of input trays	2
Maximum number of input trays	5
Auto document feeder (ADF) input capacity	100 sheets
Scan media weight	50 - 120 g/m²
Media thickness (min)	0.11 mm
Paper tray media types	Bond paper, Cut sheet, Labels, Plain paper, Pre-Printed
Paper tray media weight	60 - 163 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Plain paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 220 g/m²
Cabling technology	10/100/1000Base-T(X)
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mobile printing technologies	Apple AirPrint, Google Cloud Print, Kyocera Mobile Print, Mopria Print Service
Standard interfaces	Ethernet, USB
Optional connectivity	Ethernet, Near Field Communication (NFC), Wireless LAN
Memory slots	1
Processor family	ARM Cortex-A9
Coprocessor frequency	1 GHz
Card reader integrated	No
Maximum internal memory	3000 MB
Internal storage capacity	128 GB
Sound power level (standby)	29.6 dB
Sound pressure level (printing)	50.3 dB
Sound pressure level (quiet mode)	47 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1346 W
Power consumption (ready)	84 W
Power consumption (sleep)	0.6 W
Power consumption (copying)	547 W
Power consumption (printing)	532 W
Power consumption (average operating)	- W
Energy Star Typical Electricity Consumption (TEC)	1.63 kWh/week
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Sustainability certificates	Blue Angel, RoHS, EPEAT Silver, ENERGY STAR
Certification	TÜV/GS, CE
Included cartridge capacity (CMY)	3000 pages
Included cartridge capacity (black)	6000 pages

Weight and Dimensions

Depth	577 mm
Width	480 mm
Height	619.5 mm