8-14
Fax Settings > Default fax settings
Report
Print reports to check the machine settings and status, or set various reports for checking the results of sending and
receiving.
Report Print
[System Menu/Counter] key > [Report] > [Print Report]
Admin Report Settings
[System Menu/Counter] key > [Report] > [Admin Report Settings]
Result Report Setting
[System Menu/Counter] key > [Report] > [Result Report Setting]
Adjustment/Maintenance
[System Menu/Counter] key > [Adjustment/Maintenance]
Adjust printing quality and conduct machine maintenance.
Item Description
Status Page A status page provides the current status of machine. FAX-related information
includes the Local FAX Number, Local FAX Name, fax line setting, etc. You can print
it out as necessary.
Status Page (page 7-11)
Item Description
Outgoing FAX Report An activity report is printed out automatically after every 50 faxes sent.
Activity Report (Outgoing FAX Report and Incoming FAX Report) (page 7-10)
Incoming FAX Report An activity report is printed out automatically after every 50 faxes received.
Activity Report (Outgoing FAX Report and Incoming FAX Report) (page 7-10)
Item Description
Send Result Report Each time you send a fax, you can print a report to confirm whether the fax was sent
successfully.
Send Result Reports (page 7-7)
FAX RX Result Report When a fax is received, you can be notified by receipt result report.
FAX RX Result Reports (page 7-9)
Job Finish Notice Setting Attaches sent images to job finish notices.
Value: Do Not Attach Image, Attach Image
RX Result Report Type Fax receipt can also be notified by e-mail instead of checking the receipt result report.
Reporting FAX Receipt Result by E-mail (page 7-12)
Item Description
Density Adjustment Adjust density.
FAX Adjust the FAX scan density to darker or lighter. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
To Next Page
