Kyocera TASKalfa 8000i - Prevent Bleed-Thru

Sending Functions
6-25
6
Prevent Bleed-thru
Hide background colors and image bleed-through when scanning thin originals.
Use the procedure below to set the prevent bleed-thru when sending scanned images.
1 Press the Send key.
2 Place the originals on the platen.
3 Press [Color/Image Quality] and then press
[Prevent Bleed-thru].
4 Press [On]. Prevent Bleed-thru is selected.
5 Press [OK].
6 Specify the destination, and press the Start key to
start sending.
Hide background colors and image bleed-through
when scanning thin original.
On
Prevent Bleed-thru
Cancel OKAdd Shortcut
Status
Destination
Off
10/10/2010 10:10
100%
A4
A4
Preview
Original
Zoom
Send
:
:
: