3
CAUTION
●
Forsafetyreasonsonlyuseaccessories(testleads,probes,cases,
etc) designed to be used with this instrument and recommended
byKYORITSU.Theuseofotheraccessoriesisprohibitedasthey
areunlikelytohavethecorrectsafetyfeatures.
●
During testing it is possible that there may be a momentary
degradation of the reading due to the presence of excessive
transients or discharges on the electrical system under test.
Should this be observed, the test must be repeated to obtain a
correctreading.Ifindoubt,contactyourdistributor.
●
Use a damp cloth and detergent for cleaning the instrument. Do
notuseabrasivesorsolvents.
● Keep your fingers and hands behind the barrier during
measurement.