KYORITSU KEW 2413F - Page 10


8

Power Source  ： One 6 F 22 orequivalentbattery
Low Battery Warning  ： B  symbolisshownonthedisplay.
Current Consumption  ： Approx. 5 mAmax.
Standard(Safety)  ： IEC 61010 - 1
   IEC 61010 - 2 - 032
   CAT. Ⅲ ,AC 300 V,Pollutiondegree 2
(EMC) ： IEC 61326 - 1
Environmental Standards  ： EURoHSDirectivecompliant
Overload Protection  ： 1500 AACmaxfor 1 minute
Withstand Voltage  ：  3470 V AC for 5 secondsbetween
electricalcircuitandhousingcases
Insulation Resistance  ：  10 M Ω orgreaterat 1000 V between
electricalcircuitsandhousingcasesor
metalpartsofjaws
Conductor Size  ： Approx. 68 mmdiametermax.
Dimensions/Weight  ：  250 (L) × 130 (W) × 50 (D)mm × . 570 g
（ includingbattery ）
Accessories  ： 6 F 22 battery
   Carryingcase
   Instructionmanual
Optional Accessories  ： Model 7073 two-wayoutputcord
Peak Hold  ： Response time selectable from approx.
10 msand 100 ms.
 1 / √ 2 ofthepeakcurrentisdisplayed,
which means an RMSreading will be
obtained when  current  having
sinusoidalwaveforminmeasured.
   Peak holdreadingvariesby
approximately ± 1 % max of full scale
in thefirst minute at 23 ℃± 10 ℃  and
relative humidityof 75 % without
condensation.