—
8
—
Operating System ：Dual Integration
Display ： Field effect 3 ・1/2 digit liquid crystal
display with maximum count of 1999
Range selection ：Manual
Overrange Indication ： “ 1” is displayed on the highest digit
except for 1000A AC range.
Response Time ：Approx. 3 seconds
Sample Rate ：Approx. 3 times per second
Data Hold ：Available on all ranges
Location for use ：Indoor use, Altitude up to 2000m
Temperature ＆ Humidity ： 23℃
±
５℃ , relative humidity up to 85%
for Specified Accuracy without condensation
Storage Temperature ：-20〜60℃ , relative humidity up to 80%
& Humidity without condensation
Operating Temperature ： 0 〜 40℃ ,relative humidity up to 85%
& Humidity without condensation
Power Source ：One 6 F22 or equivalent battery
Low Battery Warning ：
“ ” symbol is shown on the display.
Current Consumption ：
Approx. 5mA max.(use Back Light:8mA max.)
Standard(Safety) ：IEC61010-1
IEC61010-2-032
CAT Ⅲ ,AC300V,Pollution degree 2
(EMC) ：IEC61326-1
Environmental Standards ：EU RoHS Directive compliant
Overload Protection ：1500A AC max for 1 minute
Withstand Voltage ：
3470V AC for 5 seconds between electrical
circuit and housing cases
Insulation Resistance ： 50M Ω or greater at 1000V between
electrical circuits and housing cases or
metal parts of jaws
Conductor Size ： Approx. 68mm diameter max.
Dimensions/Weight ： 250(L)
×
130(W)
×
50(D)mm.
Approx. 600g (including battery)
Accessories ：6F22 battery
Carrying case
Instruction manual
Optional Accessories ：Model 7073 two-way output cord
Peak Hold ： Response time selectable from approx.
10ms and 100ms.
1/ √2 of the peak current is displayed,
which means an RMS reading will be
obtained when current having sinusoidal
waveform in measured.
Peak hold reading varies by approximately
±
1% max of full scale in the first minute at
23℃
±
５
℃ and relative humidity of 75%
without condensation.
To Next Page
Loading...
