COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
July 21/17
Cleaning
23−70–30
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
Rev. 02 Page 401
CLEANING
1. GENERAL
This section contains a list of all required cleaning materials, general cleaning proce-
dures, applicable cautions and warnings related to the use of any cleaning material, and
instructions for cleaning the Model FA5000 major assemblies.
2. MATERIALS REQUIRED
Refer to Table Table 401 for a listing of required cleaning materials:
Table 401.
Cleaning Materials Required
Material Specification
Dry-Cleaning Solvent Federal Specification
Isopropyl Alcohol P−D−680
Soft-Bristle Brush
Cotton Swabs
Lint-Free Cotton Cloth
NOTE: Equivalent substitutes may be used for all cleaning materials. All ma-
terials and chemicals may be obtained from any commercial source.
3. CLEANING PROCEDURES
WARNINGS: 1) OBSERVE ALL FIRE PRECAUTIONS WHEN USING FLAMMABLE
MATERIALS FOR CLEANING PURPOSES.
2) PERFORM OPERATIONS INVOLVING CLEANING SOLVENT IN A WELL-
VENTILATED AREA. AVOID PROLONGED BREATHING OF VAPORS OR
CONTACT WITH SKIN.
CAUTION: THE FA5000 CIRCUIT BOARDS ARE SUSCEPTIBLE TO ELECTRO–STAT-
IC DESTRUCTION (ESD). PRIOR TO HANDLING PWAs, ENSURE PROPER
PERSONNEL GROUNDING TECHNIQUES ARE USED. INSURE THAT
CARDS ARE PLACED INTO STATIC SHIELDING CONDUCTIVE BAGS
WHEN HANDLING OR STORING.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General
