COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
Illustrated Parts List
23–70–30
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
Rev. 02 Page 1004
July 21/17
8. MANUFACTURER’S CODE
Due to the Level−2 maintenance philosophy used with the FA5000, all spare parts will be
ordered through L3 Technologies. L3AP Vendor Code, manufacturer name and address,
as listed in the “Federal Supply Codes for Manufacturers” Cataloging Handbook H4/H8,
Commercial and Government Entity (CAGE) codes, (formerly FSCM), and/or the NATO
Code as applicable (Ref. ATA Spec. 200), is listed below. The CAGE code is the vendor
(V) code listed in parentheses in the NOMENCLATUE column of the Detailed Parts List.
Code Manufacturer
V06141 L3 Technologies
Aviation Products Division
100 Cattlemen Rd.
Sarasota, FL 34232
V94970 Dukane Seacom, Inc.
7135 16
th
Street East
Sarasota, FL 34232, USA
9. L3 AVIATION PRODUCTS (L3AP) AUTHORIZED PARTS
L3AP has performed additional environmental testing on the Stainless and Titanium
Crash−Survivable Memory Units (CSMU) for all Models of recorders using the L3AP
90−Day Underwater Locator Beacon, PN 266E5542−00, brackets and mounting screws
that make up the ULB Conversion Kit, P/N: 068E5542−00. These tests were conducted
to ensure that the transition from the 30−day ULB to 90−Day ULB for CSMUs used on all
Models of L3AP Recorders meet the requirements of DO−160G Vibration and ED−112A
Beacon Shear and Tensile Test.
The results of these tests are contained in the following L3AP Environmental Test Re-
ports, Document Numbers:
F ENV284 − MODELS FA2100 Style CSMUs: All Part Numbers: FA2100CVR,
FDR, CVDR, MADRAS, DASU & APR2500.
F ENV285 − Models FA5000 − Titanium CSMUs: All Part Numbers: FA5000CVR,
FDR, CVDR & MADRAS
F ENV286 − SRVIVR Style CSMUs: All Part Numbers: SRVIVRCVR, FDR &
CVDR
To ensure integrity of the locating device function and the FAA Manufacturing Inspection
District Office (MIDO) approved installation and assembly of all L3AP Recorder models, it
is highly recommended that only the L3AP ULB assembly kit part number containing their
associated attaching parts be used.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
Need help?
General
