COMPONENT MAINTENANCE MANUAL
AVIATION PRODUCTS
Model FA5000
Rev. 02 Page 33
July 21/17
Description and Operation
23–70−30
Use or disclosure of information on this sheet is subject to
the restrictions on the cover page of this document.
The FA5000 is connected to its control unit or preamplifier module by means of the air-
craft wiring. Refer to Figure 18 for the Standard ARINC−757 and Figure 19 for the Stan-
dard ARINC−757/A Interface Wiring Diagrams used when installing the FA5000CVR into
an aircraft.
The Control Unit & Microphone information can be found in CMM, ATA No.
23−70−05, p/n: 165E1747−00 for ED−56A installations or the FA5000CVR Installation & Opera-
tion manual, p/n: 165E5327−00.
The document reference is online, please check the correspondence between the online documentation and the printed version.
To Next Page
Loading...
