La Cornue CornuFe - To Change an Ignition Switch; To Remove a Cooktop Burner Orifi Ce

20
SERVICING  WARNING  WORK SAFELY
Where necessary disconnect from electricity and gas before starting.
Check range is safe when you have finished.
Remove the nut holding the nut holding FSD probe to
the burner mounting cross member.
Fit the new FSD probe, plug into the back of the control
valve
Reassemble in reverse order and check for correct
burner operation.
13 To Change an Ignition Switch
Change the gas valve as detailed in Section 9.
14 To Remove a Cooktop Burner Orifice
Remove the cooktop grate and burner head.
Undo the large brass nut and remove the brass
venturi.
The orifi ce is now accessible using a long box
spanner.
Alternatively, remove the cooktop as detailed in
Section 1. Remove the orifi ce directly from the
burner body. Fit the appropriate orifi ce.
Re-assemble in reverse order. Check the range is
gas sound.