29
SERVICING WARNING WORK SAFELY
Where necessary disconnect from electricity and gas before starting.
Check range is safe when you have finished.
30 To change the Cooling fan
Pull the range forward to access the rear of the
range, see the section ‘How To Move the Range for
Servicing’.
Remove the cooling fan cover (4 screws)
Remove the 6 screws holding the fan mounting
bracket to the range back.
Pull the fan and mounting bracket out and
disconnect the wiring.
Remove the old fan from the mounting bracket (4
screws).
Fit the new fan to the mounting bracket and
reassemble the in reverse order.
Check for correct fan operation.
To Next Page
Loading...
