Table of Contents
Lets Get Started
Let’s Get Started
Atomic Time
Buttons
Basic Settings
Select Fahrenheit | Celsius
Set Alarm Time
Activate | Deactivate Alarm
Snooze Alarm
Projection: Intensity, Rotation
Projection Modes:
Time, Temperature
Backlight
USB Charging Port
2
2
3
3
4
4
4
4
5
5
6
6
1. Insert 2-AA batteries into your outdoor sensor.
2. Insert the 5 volt power cord into a wall outlet, then into the
clock. Install 2-AAA batteries for backup time and date.
3. After 5 minutes, place the sensor outside in a shaded
location. Configure basic settings.
Welcome to the La Crosse Technology® family!
We hope you enjoy your new Projection Alarm.
• The backlight and USB charging port will momentarily turn o
while the clock searches for the atomic signal.
• After the initial search, your clock will only search for the
atomic signal after midnight.
• The atomic time signal icon (tower) will flash while searching,
and be solid when connected.
• Press -/TIME button anytime, to manually search for the
Atomic time signal.
• For information about WWVB visit: http://bit.ly/AtomicTime
Page | 1 www.lacrossetechnology.com/support 616-146v3 616-146v3 www.lacrossetechnology.com/support Page | 2
AA
AA
AAA
AAA
Atomic Time
Temperature Trend Arrows
Search for Outdoor Sensor
Restart
Position TX141v2 Sensor
Low Battery Icon
Help Us, Help You
Let’s Get Social
Care and Maintenance
Warranty and Support
Specifications
FCC Statement
6
7
7
7
8
8
8
9
9
9
11
To Next Page
Loading...
Need help?
General
