Model: BBB87276 www.lacrossetechnology.com/support Page | 3
SET TIME ALARM
1. Hold the ALARM button to enter alarm time set mode.
2. Use the + or − buttons to adjust values.
3. Press the ALARM button to confirm adjustments and move
to the next item.
Alarm Time setting order:
1. Hours
2. Minutes
ACTIVATE / DEACTIVATE TIME ALARM
• Press the ALARM button once to view alarm time.
• Press the ALARM button again to activate the alarm.
Bell icon appears.
• Press the ALARM button again to deactivate the alarm.
The bell icon disappears.
SNOOZE (Silences alarm temporarily)
• Press the SNOOZE button to silence alarm for 10
minutes.
• Zz will show next to the alarm bell.
Note: The alarm is crescendo sound. The alarm will sound for 2
minutes and then shut off completely.
WWVB MANUAL TIME SEARCH
Press the + button to start or stop a manual signal search.
WWVB Icon will flash
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
After the initial search, this clock will only search for the atomic signal
after midnight.
CARE AND MAINTENANCE
• Do not mix old and new batteries
• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
• Always purchase the correct size and grade of battery most suitable for
the intended use.
• Replace all batteries of a set at the same time.
To Next Page
Loading...
