13 | Page
TROUBLESHOOTING
BAR CODE: WHAT ARE THE BARCODES AND ID NUMBERS
ON MY ALARM CLOCK?
• The barcodes are important identifiers for the La Crosse View™ app if you choose to
connect.
FACTORY RESET: HOW DO I FACTORY RESET MY ALARM CLOCK?
• A factory reset will delete all sensor ID numbers and if connected, remove all Wi-Fi
connections.
• Basically this is a great way to return your alarm clock to “out of the box” condition.
• This is more effective than removing all power for clearing out the alarm clock.
• All history records will be removed, so write down anything you want to keep.
To factory reset your alarm clock:
1. Hold the ALARM and NAP buttons together for 5 seconds.
2. When your alarm clock resets it will look for all sensors. Allow at least ten minutes to
reacquire the sensors.
Note: If operating connected, you will need to reconnect to Wi-Fi from the app.
HOW DO I CHANGE BETWEEN FAHRENHEIT AND CELSIUS?
• On your sensor, open the battery cover and press the F/C button. This will change the
temperature display on the sensor only.
• On your alarm clock enter the program menu to select Fahrenheit or Celsius temperature
display on the alarm clock.
To Previous Page
Loading...
Need help?
General
