3 | Page
ADD SENSOR: How can I add sensor to my La Crosse View™ app? ........................................................................... 23
Can I connect this station to Weather Underground? ................................................................................................... 23
GENERAL INFORMATION
BATTERIES: WHAT DO I NEED TO KNOW ABOUT BATTERIES?
• Good fresh batteries are important for best performance in your sensors and as backup in
your station.
• Batteries with an expiration date of 2020, were manufactured in 2010.
• We recommend batteries with an expiration date no more than 6 years in advance of the
current year for best performance.
• A minimum voltage of 1.48 v per battery is required for best performance.
• Lithium batteries may be used in outdoor sensors. Alkaline batteries for the station.
HARDWARE: SENSORS AND STATION
Your C84428 station comes with:
LTV-W1
Wind Speed sensor.
Rain sensor
Thermo-hygro sensor that reads Temperature and Humidity.
All sensors operate at 915MHz RF.
WHAT ARE THE POWER REQUIREMENTS FOR THIS STATION?
2-C batteries
: 2-AA batteries
: 2-AA batteries
5 volt power cord (required) and 3-AA batteries for optional backup of your time and
date. Battery operation only will not update sensor or Wi-Fi data. Power cord is required.
POWER INPUT: WILL THIS STATION WORK IN OTHER COUNTRIES??
• Your power cord input is 100-240V 0.3A 50/60Hz, and may work in other countries if the
proper plug adapter is used (not included).
There is no guarantee that this power cord will work in other countries.
• As a standalone station-, you can use this anywhere.
However the La Crosse View™ app was designed to work with the National Weather Service
(NWS) and National Institutes of Standards and Time (NIST) in the USA. Because of this, we
cannot guarantee that any “connected” features will work in another country.
To Next Page
Loading...
Need help?
General
