Glide Pro Sensor Mounting
SENSORS
20
Fence posts, poles, decks, and mailboxes are common mounting options due to their convenience.
Many users prefer these types of locations as the data they provide is accurate from their ground
level perspective. However, because the wind in these spots is often aected by obstructions, the
readings may dier when compared to local reporting stations.
If the basic installation option detailed above isn’t suitable for your location, the Glide Pro Sensor is
designed to work in a variety of configurations. See the next page for details regarding flexible and
advanced installation options.
Basic Installation
Mount the Mast to a flat surface
with the four provided screws.
Place the Glide Pro Sensor on
top of the Mast. Ensure the Solar
Panel is facing south.
Secure the Glide Pro Sensor to
the Mast by tightening the screws
on the side.
To Next Page
Loading...
