1. The snooze time (in minute) digit will be flashing. Use the CH/ + key to set the snooze
time (in minute). Each pressing of the key will increase the snooze time by 5 minutes.
The snooze can also be set OFF when the “OFF” digit is being displayed.
2. Confirm with the SET key and enter the “ºC / ºF temperature unit setting” or exit the
manual setting mode by pressing the SNOOZE/ SUN key.
Note: If the snooze time has been set “OFF”, the snooze function will not be activated.
°C/°F TEMPERATURE UNIT SETTING
The default temperature reading is set to °C (degree Celsius). To s elect °F (degree
Fahrenheit):
1. The “°C” will be flashing, use the CH/ + key to toggle between “°C” and “°F”.
2. Once the desired temperature unit has been chosen, confirm with the SET key and
enter the “Weather Forecast Icon Sensitivity setting” or exit the setting mode by
pressing the SNOOZE/ SUN key.
flashing
To Next Page
Loading...
Need help?
General
