The transmission range is about 100 m from the transmitter to the Weather Clock (in open
space). However, this depends on the surrounding environment and interference levels. If no
reception is possible despite the observation of these factors, all system units have to be
reset (see Setting up).
POSITIONING THE WEATHER STATION:
The Weather Clock comes complete with a foldout stand that gives the
option of table standing or wall mounting.
To wall mount:
1. Fix a screw into the desired wall, leaving the head extended out
the by about 5mm.
2. Using the Weather Clock’s hanging hole, carefully hang it onto the
screw.
Note: Always ensures that the unit locks onto the screw head before
releasing.
POSITIONING THE TEMPERATURE TRANSMITTER:
The Transmitter is supplied with a holder that may be attached to a
wall with the two screws supplied. The Transmitter can also be
position on a flat surface by securing the stand to the bottom to the
Transmitter.
To Next Page
Loading...
Need help?
General
