ALARM SETTING:
To set alarm:
1. Press and hold ALM for about 3 seconds until the alarm time display flashes.
2. The hour digit and the alarm icon will be flashing. Press the CH/ + key to adjust the
hour.
3. Press ALM button once and minute digit will be flashing. User shall then press CH/ +
button to set the minute.
4. Press ALM button once to confirm the setting.
5. To activate/ deactivate the alarm function, press the ALM button once. The display of
the alarm icon represents that the alarm is "ON".
Note: The duration of alarm sounding is 120 seconds
SNOOZE SETTING AND STOPPING THE ALARM:
1. When the alarm is sounding, press the SNOOZE/ SUN key to activate the snooze
function. The alarm will stop and re-activate after the time interval of the snooze time
pre-set by user.
Alarm icon flashing
F
To Next Page
Loading...
Need help?
General
