The last LCD section shows the outdoor temperature, a reception symbol and a channel
number under the temperature will also show if more than one transmitter has been used.
DISPLAY OF INDOOR MAXIMUM AND MINIMUM RECORDS:
1. In normal display mode, press the MIN/ MAX button three times. The maximum indoor
temperature and humidity will be shown. Also the date and time of recording this
temperature will be displayed.
2. Press the MIN/ MAX button once more to display the minimum indoor temperature
and humidity. Also the date and time of recording this temperature will be displayed.
RESETTING THE INDOOR MAXIMUM/ MINIMUM RECORDS
1. In normal display mode, press the MIN/ MAX button to advance to the MIN/ MAX
display.
2. Press and hold the SET key for about 3 seconds, this will reset all indoor minimum
and maximum data recorded to the current time, date, temperature and humidity. The
max/ min temperature of the currently selected outdoor channel will also be rest at the
same time
DISPLAY OF OUTDOOR MAXIMUM AND MINIMUM RECORDS:
1. In normal display mode, press the CH/ + button to select the desired channel. The
channel ID will be displayed above the outdoor temperature reading.
2. Press the MIN/MAX button, the max temperature of the selected channel will be
displayed. Also the date and time of recording this temperature will be displayed.
3. Press the MIN/MAX button once more, the min temperature of the selected channel
will be shown. Press the ALM button to go back to the normal display mode.
To Next Page
Loading...
Need help?
General
