Name: Lab.gruppen D 200:4L
Brand: Lab.gruppen
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6. Installation

D SERIES Lake Operation Manual rev 3.0.4

6. Installation

D SERIES Lake Operation Manual rev 3.0.3

5.3.3. Other Documentation

This Operation Manual is intended to serve as a guide and reference to the operation and maintenance of the

D Series Lake hardware platform. Comprehensive information is given regarding installation, connection and

operation of the front panel interface.

D Series Lake ampliers are designed for conguration and operation using the Lake Controller and CAFÉ software

programs. This manual includes a brief tutorial on how to put an amplier into service using Lake Controller, and it

also includes an overview of some features that are implemented via CAFÉ.

For complete information on DSP conguration and operation using Lake Controller, please refer to the Lake

Controller Manual, available online at www.labgruppen.com/support.

For detailed information on conguration and operation of the power platform using CAFÉ, please refer to the guide

embedded in the software or to the CAFÉ Coach video series available on the Lab.gruppen YouTube channel or

via a link on the Lab.gruppen web site.

6. Installation

6.1. Unpacking

Carefully open the shipping carton and check for any damage to the device or the supplied accessories. Every

Lab.gruppen product is tested and inspected before leaving the factory and should arrive in perfect condition. If

any damage is discovered, please notify the shipping company immediately. Only the consignee may initiate a

claim with the carrier or their insurers for damage incurred during shipping. Save the carton and packing materials

for the carrier’s inspection.

6.1.1. Included in the box

In addition to the D Series device, the shipping carton includes the following items:

• D Series Lake Quick Start Guide

• AC mains lead (power cable) with Neutrik powerCON connector (D200, D120 and D80) or IEC connector

(D40, D20 and D10) and AC socket plug according to ordering selection

• Rear brackets for additional rear rack support (pair) along with associated mounting hardware

• Connector kit including all needed connectors

• Front grille and dust lter assembly

NOTE: Depending on the model, the connector kit might include more connectors than applicable for

the product you have. Select those connectors required for your unit and application.

Please keep the original carton and associated packaging to facilitate shipping of the device should the need arise.

Lab.gruppen D 200:4L User Manual

Other manuals for Lab.gruppen D 200:4L