Paper Specifications
Size: Width: 80.0mm+0.5mm
(3.15” + 0.02”)
Maximum outside
diameter:
83 mm (3.27”)
Paper roll spool
diameter:
Inside: 12mm (0.47”)
Outside: 18mm (0.71”)
Paper must not be pasted to the
paper roll spool.
Paper roll
(single-ply):
Take up paper roll
width:
80 +
0.5 mm
(3.15”+0.02”)
Electrical Characteristics
Supply voltage:
+24 VDC + 7%
(standard accessory power supply)
High-speed
mode:
Mean: Approximately 1.7A
Peak: Approximately 7.7A
Low-power-
consumption
mode:
Mean: Approximately 1.2A
Peak: Approximately 6.6A
Current
consumption:
(at 24V)
Standby Mean: Approximately 0.2A
3-3
Reliability
Mechanism: 15,000,000 lines
Thermal
head:
100 million pulses, 50 km
Auto cutter: 1,200,000 cuts
Life:
(End of Life is defined to have reached the end of its
life when it reaches the beginning of the Wear out Period.)
52,000,000 lines
MCBF:
(This is an average failure interval based on failures
relating to wear out and random failures up to the life
of 15 million lines.)
Environmental Conditions
Operating:
5℃ to 45℃(41℉ to 113 ℉
Temperature:
Storage:
-10℃to 50℃(14℉ to 122 ℉),
except
for paper
Operating:
10 to 90 %
(RH)
Humidity:
Storage:
10 to 90 %
RH
,
except for paper
3-4
To Next Page
Loading...