H
Harry SmithSep 13, 2025
What causes conductivity reading fluctuates on Labconco FlaskScrubber Vantage?
- KkimberlywilsonSep 13, 2025
Fluctuating conductivity readings on your Labconco Washer can be caused by the washing action.
To Next PageTo Next PageWhat causes conductivity reading fluctuates on Labconco FlaskScrubber Vantage?
Fluctuating conductivity readings on your Labconco Washer can be caused by the washing action.
What causes Water Low Alarm on Labconco Washer?
If you are getting a Water Low Alarm on your Labconco Washer, first make sure the water is turned on. Also, clean the screens inside the inlet fittings of the water valves. Check for kinks in water hoses in the base of the washer.
General| Model | FlaskScrubber Vantage Series |
|---|---|
| Type | Laboratory Glassware Washer |
| Dimensions | Varies by model |
| Exterior Material | Stainless Steel |
| Interior Material | Stainless Steel |
| Weight | Varies by model |
| Material | Stainless Steel |
| Capacity | Varies by model |
| Temperature Range | Up to 93°C (200°F) |
| Electrical Requirements | 120V or 230V, 50/60Hz |
| Number of Spindles | Varies by model |
| Programs | Multiple programmable cycles |
| Wash Cycles | Customizable |
Labconco's warranty on parts and factory workmanship, including exceptions.
Procedure for returning goods and handling transit damage claims.
Statement regarding user compliance with regulations concerning waste materials.
Information for obtaining technical assistance or asking questions.
Explanation of safety alert symbols and warning messages for user safety.
Details required hot water temperature and flow rate for optimal operation.
Specifies purified water supply needs for rinse cycles and flow rate.
Outlines electrical specifications, voltage, and circuit breaker needs for installation.
Details drain hose size, routing, and air gap recommendations for proper drainage.
Addresses undercounter installation needs and refers to appendix for dimensions.
Instructions for unpacking, inspecting for damage, and handling the shipping skid.
Lists included washer parts and accessories to verify presence and condition.
Step-by-step guide to remove the washer from its shipping skid.
Procedure for attaching leveling feet and ensuring the washer is stable and level.
How to adjust leveling feet to center the washer door for proper alignment.
Guides for connecting hot water supply and purified water for optimal cleaning.
Instructions on routing and connecting the drain hose, emphasizing air gaps.
Detailed steps for hard-wiring the washer to the power source, including safety checks.
Guide to setting up basic washer parameters and running diagnostic tests.
How to fill and purge the detergent and neutralizing acid rinse systems.
Advice on arranging racks and loading glassware for effective cleaning.
Details on the door-mounted detergent dispenser and how to fill it.
Steps to fill the neutralizing acid dispenser for pH adjustment during rinsing.
Guide to selecting, customizing, and initiating wash programs.
How to interrupt cycles and understand various alarm messages.
Instructions for connecting the washer to computers or printers for data monitoring.
Guide to cleaning and maintaining the interior stainless steel surfaces.
Instructions for cleaning the drain air gap and water fill valve filter screen.
Procedure for replacing the light bulb if the washer has a window.
Instructions on how to remove and clean the sump filter screen.
Guide for replacing the HEPA filter if airflow is blocked.
How to clean and potentially replace the conductivity sensor for accurate readings.
Steps to install upper spindle racks and various inserts like pipet holders.
How to adjust the height of the upper rack for different glassware sizes.
Instructions for replacing standard spindles with small spindles for small glassware.
How to install various optional inserts like Multi-Pin inserts into the spindle rack.
Steps to install the optional kit to cool drain water.
Corrective actions for detergent cup issues and common operational noises.
Troubleshooting poor drying, washing results, and drainage issues.
Resolving issues with washer water fill, drainage, and overfilling.
Troubleshooting control panel malfunctions and conductivity sensor readings.
Troubleshooting specific alarms like Drain Fail, Water High/Low, and Low Temp.
Details on upper and lower spindle racks for glassware washing.
Information on pipet inserts and glassware holders for various glassware.
Inserts for culture tubes, test tubes, and other specialized racks.
Inserts for Petri dishes, BOD racks, utensil baskets, and sequencing plates.
Top racks, utensil holders, stands, and connection kits for the washer.
List of available detergents and neutralizing acid rinse for the washer.
Diagram showing overall external dimensions of the glassware washer.
Diagrams showing interior dimensions with racks configured with and without spindles.
Technical specifications including fill temp, water consumption, and pressure.
Details operating voltage, amperage, frequency, and sump heater power.
Specifies environmental requirements like altitude, temperature, humidity, and voltage.
Table detailing program times and water consumption for various wash cycles.
Details manufacturer name, address, equipment type, and model numbers.
Lists applicable EU directives and harmonized standards the equipment complies with.