15
Product Service: Domestic 1-800-522-7658, International 816-333-8811
Chapter 3: Getting Starte
Catalog #
7750000
7750001
7750003
7750004
7751000
7751001
7751003
7751004
Product De
scription
Benchtop – 115V, 60 Hz
Benchtop – 220/240V, 50 Hz
Benchtop with PTFE-coated Chamber – 115V, 60 Hz
Benchtop – 208/230V, 60 Hz
Console – 115V, 60 Hz
Console – 220/240V, 50 Hz
Console with PTFE-coated Chamber – 115V, 60 Hz
Console – 208/230V, 60 Hz
Plus the Following:
Part # Component Description
7519800 User’s Manual
7688500 Lid Gasket
7730700 Lid
1336400
1337300
Power Cord – 115V
or
Power Cord – 230V
7646000 Tubing
1967600 Clamps (2)
1291000 Plug, 230V, IEC 320 (230V Models only)
If you did not receive one or more of the components
listed for your Freeze Dryer, or if any of the
components are damaged, contact Labconco
Corporation immediately for further instructions.
Setting Up Your Freeze
Dryer
After you verify receipt of the proper components,
move your Freeze Dryer to the location where you want
to install it. Then, follow the steps listed below.
Component Orientation
The refrigeration system in the Freeze Dryer exhausts
air through the rear of the cabinet. A minimum of 3"
should be allowed between the back of the Freeze
Dryer and the adjacent wall surface. Restriction of the
airflow through the cabinet during operation could
adversely affect performance.
To Next Page
Loading...
