Part Number 1071400, Rev. A, ECO N670 Page 5 of 5
Final Steps
All Class II BSCs must be tested by a qualified Certifier prior to use.
Depending on application requirements, some Type A2 and C1 BSCs may need to be
connected to exhaust ductwork. All Type B2 BSCs must be connected to exhaust
ductwork to function properly.
Some BSCs may include service fixtures (valves) that must be plumbed prior to use.
This Quick Start Installation Guide may not provide all the information necessary
for your particular biosafety cabinet installation. For further details including user’s
manuals and installation videos, scan the QR code or click here.
To Previous Page
Loading...
