LabelMill LM1012 - Page 5

LM1012TTS Table-Top Label Applicator System
USER'S MANUAL
Made in the U.S.A.
© 2022 LABELMILL
01/01/2022 Model LM1012TTS
Page 5
LM1012TTS SPECIFICATIONS
LABEL SPEED
0 - 1400 linear inches of web per minute standard
LABEL ROLL
CAPACITY
12" Max. outside diameter wound on a 3" diameter core. Die cut waste removed with a
minimum of 1/8" separation between labels in running direction.
LABEL SIZE
Minimum: 1/2" wide x 1/2" long - Maximum: 4.5" wide x 10" long
LABEL PLACEMENT
ACCURACY
Up to 1/32" (1mm) when labels are produced to specifications and product handling is
controlled.
INTERFACE
SENSORS
Product Sensor-Photo Eye-Limit Switch, Label Sensor Switch, Head Up Limit Switch,
and Round Product Tamp Switch.
ELECTRICAL
115 V AC/60 Hz - 2A
AIR REQUIREMENT
80p.s.i. / 3 cfm
SIZE
26"H x 20"W x 24"D
WEIGHT
40 lb.
ENVIRONMENT
Operating Temp. 50-95 F. (10-15 C.) - 15-85% RH. non-condensing
*Options Available