- Keep the hatch or the well door sea tight.
- Always tow at low speeds.
- Secure the tow line in such a way that it can be released under tension.
- The owner must ensure that mooring and towing ropes as well as fastening points and chains correspond to the condition of
use of the boat.
5
58
5. ANCHORING, MOORING AND TOWING
WARNING
If the boat is fitted with non-metallic strong points,
their limited lifetime must be taken into account.
This means that they will have to be replaced as soon as
they show any signs of damage, visible surface cracks or
permanent distortion.
NOTE: Dark-coloured elements are less sensitive to UV light
than light-coloured elements.
WINDLASS 2000 W - CHAIN 14
CAPSTAN
(SAME ON THE PORT SIDE -
SYMMETRICAL)
STAINLESS STEEL CLEAT B400X SEASMART
(SAME ON THE PORT SIDE - SYMMETRICAL)
CHAIN CHANNEL
SPADE ANCHOR SQ 240
MOORING AND
TOWING BRIDLE
FAIRLEAD (SAME
ON THE PORT SIDE
- SYMMETRICAL)
STAINLESS STEEL CLEAT B400X SEASMART
(SAME ON THE PORT SIDE - SYMMETRICAL)
STAINLESS STEEL CLEAT B400X
SEASMART
(SAME ON THE PORT SIDE -
SYMMETRICAL)
To Next Page
Loading...
