EQUIPMENT
43
LEAVING THE BOAT
- Connect the shore socket,
- Switch the generators off and switch the source selectors
to the shore line.
- Activate the charger circuit breakers in the AC panel
located in the starboard companionway.
- NEVER CUT the shut-off circuit breakers located under the
floor between the batteries and the distribution busbars in
the starboard forward companionway.
- Cut the connecting circuit cut-out between power busbars
X01 and X02 to isolate the whole boat except for the battery
charge and direct automatic drainage (floats and bilge
pumps).
To Next Page
Loading...
