4
10” TABLE SAW
Thank you for choosing this table saw.
This unit is carefully tested and inspected
before shipment.
To ensure optimum performance and trouble
free operation a reasonable amount of care
and attention is required.
To get the most from your new table saw,
please take the time to read this manual
before assembling, installing and operating
the unit.
The table saw features a circular blade that
can be raised and lowered to control the depth
of cut.
There is a rail-mounted fence, which slides
freely toward or away from the blade, is used
as the main cutting guide for the work piece.
The miter gauge is used to guide and support
the work piece during the cut when the work
piece cannot slide against the fence. The
miter gauge body can be rotated to allow a
wide range of cutting angles.
The blade guard assembly is equipped
with a spreader, anti-kickback pawls and
riving knife, which work to prevent kickback
and stop or slow kickback if it happens. The
machine is supplied with a riving knife.
The push Stick is used to support the work
piece during the cut and reduces the risk of
injury by keeping hands away from the blade
while cutting.
To Next Page
