Adjustments
Rear Seats
Correct seating position
Passengers must adjust the seatback so that their backs are straight, and position the headrest
(where adjustable) so that the upper edge is aligned with the top of their heads.
Electric Seat Adjustment
Push the
1
button forwards or backwards to move the seat forwards or backwards.
Push the
1
button upwards or downwards to raise or lower the seat. Push the front or rear part
of the button to adjust only the front or rear portion of the seat.
Push the upper part of the
2
button forwards or backwards to adjust the seat tilt.
Press the
3
button corresponding to the movement you wish to activate, up or down to move the lumbar support vertically; forwards or backwards to
inflate or deflate the lumbar support.
1
2
3
3
3
3
4
5
6
Manual Seat Adjustment
To adjust the seatback, lift the lever
4
on the side of the seat cushion, move the seatback to the required
position and release the lever.
To fold the seatback, lift the lever
4
so that the seatback springs forwards, release the
lever and then fold the seatback until it clicks into position. To return the seatback to
the vertical position, lift the lever, straighten the seatback then push it backwards until it
clicks into position.
To fold the centre seatback on its own, press the lever
5
next to the headrest so that
the seatback springs forwards, release the lever and then fold the seatback until it clicks
into position. To return the seatback to the vertical position, press the lever, straighten
the seatback then push it backwards until it clicks into position.
Pull the headrest upwards to raise it. Press the button
6
and push the headrest
downwards to lower it.