2
OVERVIEW
The WaterLink
®
Spin photometer measures 13 important pool and spa
important test factors such as Free Chlorine, Total Chlorine, Bromine, Total
Alkalinity, pH, Calcium Hardness, Copper, Iron, Cyanuric Acid, Phosphate,
Borate, Biguanide, and Biguanide Shock. This innovative photometer is
easy-to-use with a disk reagent system that holds the precise amount of
reagents needed to run the tests. LaMotte chemists developed reagent disks
specifically for the in-store pool and spa analyst who desired similar precision
to current water labs but without the time-consuming procedures or testing
limitations of test strips.
This in-store lab is simple to use: just use the precision syringe to add a pool
or spa water sample to the disk which contains all the reagents needed for
each test series. The disk is placed in the photometer chamber and the results
are ready in an instant. A complete series of tests can be completed in one
minute. When completed, the disk is discarded and the next test is started.
With all the necessary reagents in disposable disks, no time is wasted in test
preparation or cleanup. Since there are no tubes to clean for future testing,
overall time savings are doubled. User error is significantly reduced since the
user no longer has to measure reagents.
The DataMate software will analyze the data and recommend products along
with treatment instructions. Included in the DataMate 10 Software is the
WaterLink
®
Spin Application that operates the WaterLink
®
Spin photometer.
To Next Page
Loading...
