Lamtec ETAMATIC Quick Reference

3
1 General Information
1 General Information
1.1 Validity of these Instructions
This manual is valid for the ETAMATIC ETAMATIC S in any configuration.
The content of this document refers to software version v5.8. Other software versions may
cause that some of the functions described in this document are not available or have another
functionality as described in this document.
These devices conform to the following standards and regulations:
• DIN EN 298: 2012-11
• DIN EN 1643: 2014-09
• DIN EN 13611:2011-12
• DIN EN 60730-2-5: 2015-10
• DIN EN 60730-1:2012-10
• 2014/35/EU Low Voltage Directive
• 2014/30/EU EMC-Directive
• 2014/68/EU Pressure Equipment Directive
• (EU) 2016/426 Gas Appliance Directive
• 2011/65/EU RoHS
Test symbols: CE-0085 AU 0207
The ETAMATIC is a control unit for combustion systems.
NOTICE
Respect the national safety regulations and standards.

Lamtec ETAMATIC Specifications

General

Brand	Lamtec
Model	ETAMATIC
Category	Controller
Language	English