To Next PageTo Next Page
Need help?Do you have a question about the Lancom 821+ and is the answer not in the manual?
General| Dimensions (WxDxH) | 210 x 140 x 45 mm |
|---|---|
| Connectivity technology | Wired |
| Maximum data transfer rate | 0.1 Gbit/s |
| Supports ISDN connection | Yes |
| Voice codecs | G.711a, G.726 |
| Routing protocols | RIP-1, RIP-2 |
| Data link protocols | Ethernet, Fast Ethernet |
| Supported protocols | ITU G.992.5, ITU G.992.1 (G.DMT) An. B |
| Switching protocols | Ethernet |
| Supported network protocols | TCP/IP, PPTP, UDP/IP, ICMP/IP, IP/IPX, PPPoE |
| Ethernet LAN (RJ-45) ports | 4 |
| Authentication method | RADIUS, PAP, CHAP, MS-CHAP |
| Certification | CE, EN 60950, EN55022, EN55024 |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
Provides step-by-step instructions for physically connecting the LANCOM router hardware.
Guides through the installation process for the Windows-compatible LANtools software.
Explains automatic and manual TCP/IP configuration options for the network.
Details how to secure the router's configuration using a password.
Provides instructions for using the LANconfig tool for device setup and configuration.
Guides on configuring the LANCOM device using a web browser (WEBconfig).
Details the step-by-step process of using the Internet Connection Wizard.
Provides instructions for using the Internet Connection Wizard within LANconfig.
Provides instructions for using the Internet Connection Wizard via WEBconfig.
Guides on configuring the firewall using the Firewall Wizard for network protection.
Explains how to use the Firewall Wizard within LANconfig for rule creation.
Describes how to configure firewall settings using WEBconfig.
Details TCP/IP addressing and configuration for router-based network linking.
Guides on using LANconfig to connect two local area networks.
Explains the simplified 1-Click-VPN wizard for site-to-site network coupling.
Guides on configuring network linking using WEBconfig (expert configuration).
Details TCP/IP settings for assigning IP addresses to RAS users.
Outlines requirements for establishing dial-up connections using VPN.
Details the configuration steps for dial-up connections via ISDN.
Guides on using LANconfig to set up dial-in (RAS) access.
Explains easy setup of VPN accesses for the LANCOM Advanced VPN Client.
