Lancom 821+ - 6.1 Which information is required?; 6.1.1 General information

LANCOM 821+ – LANCOM 1711+ VPN – LANCOM 1721 VPN
 Chapter 6: Providing dial- in access
50
EN
6.1.1 General information
The following entries are required to set up a RAS connection. The first column
indicates whether the information is required for a VPN (standard method
using “preshared keys“) and/or an ISDN connection.

Further details to network couplings via VPN using enhanced methods
(e.g. digital certificates) can be found in the LCOS reference manual.
Notes to the individual values:
 User name and password: Users authenticate themselves with this
information when dialling in.
 Incoming number: The LANCOM Router uses the optional ISDN caller ID
as an additional user authentication. This security function should not be
used when users dial in from differing locations.
Coupling Entry
VPN + ISDN User name
VPN + ISDN Password
VPN Shared secret for encryption
VPN Hide local stations for access to remote network (Extranet VPN)?
ISDN Incoming number of remote station
ISDN TCP/IP routing for access to remote network
ISDN IPX routing for access to remote network
VPN + ISDN IP addresses for the dial-up PCs: static or dynamic by address range (IP
address pool)
VPN + ISDN NetBIOS routing for access to remote network?
VPN + ISDN Name of remote workgroup (NetBIOS only)