Lancom 821+ - Page 13

LANCOM 821+ – LANCOM 1711+ VPN – LANCOM 1721 VPN
 Chapter 1: Introduction
12
EN
Bridge function for coupling networks via ISDN connection
✔✔✔
Port-Mapping to set up LAN ports as additional WAN ports
✔✔
Policy-based routing for policy-based selection of target routes
✔✔✔
Load-balancing for bundling of multiple DSL channels 2 channels 4 channels 4 channels
Backup solutions and load balancing with VRRP
✔✔✔
NAT Traversal (NAT-T)
✔✔✔
DMZ with configurable IDS checks
✔✔✔
PPPoE-Server
✔✔✔
WAN- RIP
✔✔✔
Spanning Tree Protocol
✔✔✔
Layer-2-QoS-Tagging
✔✔✔
ISDN leased lines
✔✔✔
LANCAPI server for the operating with office applications as fax or
answering machine via ISDN interface
✔✔✔
WAN connection
Connection for DSL or cable modem
✔✔✔
Integrated ADSL modem (ADSL2+ ready)
✔✔
ISDN S
0
bus in multi device-mode or in point-to-point mode with auto-
matic D-channel protocol identification. Supports static and dynamic
channel bundling per MLPPP and BACP as well as Stac data compression
(Hi/fn)
✔✔✔
Port for external modem, analogue or GSM (requires LANCOM modem
adapter kit; from LCOS 5.0)
✔✔✔
LAN connection
4 individual Fast Ethernet LAN ports, switchable separately, e.g. as LAN
switch or separate DMZ ports, auto crossover.
✔✔✔
USB connector
USB 2.0 host port (full speed: 12 Mbps) for connecting a USB printer and
for future extensions
✔✔
Security functions
IPSec encryption in external software (VPN client)
✔✔
5 integrated VPN tunnels for protection of network connections
✔✔
IPSec encryption in hardware (optional; activated with the VPN-25
option)
✔✔
LANCOM
821+
LANCOM
1711+ VPN
LANCOM
1721 VPN