Landi E830 - 1 Product Introduction; Unpacking Inspection; Appearance and Interface; Appearance



ThisdocumentisthepropertyofLANDI.
Itscontentcannotbereproducedordivulgedwithout

the company’swrittenapproval.
6/18
GPRS General Packet Radio Service
GPS Global Positioning System
GSM Global System for Mobile
Communications
IC Card Integrated Circuit Card
LCD Liquid Crystal Display
LED Light Emitting Diode
MicroSD Card Trans Flash Card
RF Card Radio Frequency Card
SAM Card Security Access Module Card
SIM Card Subscriber Identifying Module Card
USB Universal Serial Bus
WCDMA Wideband Code Division Multiple
Access
WIFI Wireless Fidelity

1 Product Introduction
1.1 Unpacking Inspection
Please open the box and check carefully if the terminal and accessories were unpacked or damaged due to transportation. E830 is a
device with security characteristic. Any disassembly will probably make it work abnormally.
Open the box:
1. Open and check following items:
 Terminal,
 External power adapter ,
 Security, warranty and installation guides
2. Open all plastic wrapping of the terminal and other accessories.
3. Tear off the transparent protective film on the LCD screen.
4. Save the shipping carton and packing material for future repacking or terminal movement.
*****************************************************************************************
WARNING
E830 is a device with security characteristic. Any disassembly will probably make it work abnormally.
*****************************************************************************************
1.2 Appearance and Interface
1.2.1 Appearance