14
CONTACT HEART RATE MONITORING SYSTEM (OPTIONAL)
The Contact Heart Rate Monitoring System can be used in place of the wireless chest strap to monitor your heart rate.
1. Grab onto the pulse grip portion of the center rail.
2. As soon as you put your hands on the grips a heart will beat on the display. This indicates that the system has been
activated.
3. The heart will “beat” briefly and then display your heart rate. Your heart rate will be continuously monitored while your
hands remain on the grips.
NOTE: If you are wearing the wireless chest strap, the contact heart rate system will override the wireless signal
while your hands are on the bar. Once you release the contact heart rate bar, the treadmill defaults back to the
wireless chest strap signal.
The Contact Heart Rate Monitoring System is designed to be used at walking speeds. A natural running motion involves
using your arms to maintain balance. Since contact heart rate systems require your arms to remain stationary, we
recommend using the system only at speeds of less than 4 mph (6.4 km/h) or the fastest speed at which you are comfortable
walking.
Heart Rate Transmitters
To Next Page
Loading...
