Lantronix Ethernet

Contents
WiBox2100E User Guide 4
Server Configuration ____________________________________________________30
Hostlist Configuration ___________________________________________________32
Channel 1 and Channel 2 Configuration _____________________________________33
Serial Settings ______________________________________________________________33
Connection Settings - TCP ____________________________________________________36
Connection Settings - UDP ____________________________________________________39
WLAN Configuration ____________________________________________________41
Updating Settings ______________________________________________________44
Applying Defaults_______________________________________________________44
5: Telnet or Serial Port (Setup Mode) Configuration 45
Accessing Setup Mode __________________________________________________45
Telnet Connection ___________________________________________________________45
Serial Port Connection _______________________________________________________46
Exiting Setup Mode _____________________________________________________46
6: Setup Mode: Server Configuration 47
Server Configuration (Option 0)____________________________________________47
Network Mode ______________________________________________________________47
IP Address____________________________________________________________47
Set Gateway IP Address _________________________________________________48
Netmask: Number of Bits for Host Part ______________________________________48
Change Telnet Configuration Password _____________________________________48
DHCP Name __________________________________________________________49
7: Setup Mode: Channel Configuration 50
Channel 1 (Option 1) ____________________________________________________50
Baudrate _____________________________________________________________50
I/F (Interface) Mode _____________________________________________________51
Flow_________________________________________________________________51
Port Number __________________________________________________________52
Connect Mode _________________________________________________________52
a) Incoming Connection ______________________________________________________54
b) Response _______________________________________________________________54
c) Active Startup ____________________________________________________________54
d) Datagram Type ___________________________________________________________57
e) Modem Mode ____________________________________________________________57
Send the Escape Sequence (+++) in Modem Mode ____________________________59
Auto Increment Source Port ______________________________________________59
Remote IP Address _____________________________________________________60
Remote Port __________________________________________________________60
DisConnMode _________________________________________________________60
Flush Mode (Buffer Flushing) _____________________________________________61
Pack Control __________________________________________________________61
Packing Interval_____________________________________________________________62
Trailing Characters __________________________________________________________62
Send Characters ____________________________________________________________62
DisConnTime (Inactivity Timeout) __________________________________________62