Lantronix Ethernet User Manual

Web-Manager Configuration
WiBox2100E User Guide 40
Figure 4-7. UDP Connection Settings
2. In the available fields, enter the following information:
Datagram Mode
Datagram Type Configures remote IP or network broadcast address and the
remote port. Enter 01 for directed or broadcast UDP. The
default setting is 00.
Accept Incoming Select Yes to accept incoming UDP datagrams.
Endpoint Configuration
Local Port
Enter the local port number.
Remote Port
Enter the port number of the remote device.

Lantronix Ethernet Specifications

General

Brand	Lantronix
Model	Ethernet
Category	Network Card
Language	English